Next Paints
NEXT Weather Cover
A high performance topcoat emulsion paint, based on pure acrylic polymer by special technology to provide superior adhesion, high durable, good resistance to harsh weather conditions and low dirt pick up, with high color retention to impart surfaces long lasting protection.
FEATURE:- Excellent dirt pick-up resistance.
- Excellent UV resistance and color retention property.
- Highly hydrophobic.
- Low VOC
- Good wash ability.
- Good weather resistance.
- Good opacity.
- Easy to clean.
- Allows water vapour to pass from the substrate through the paint film. Excellent adhesion and hardness.
Technical Specification:
1: Composition: Based on 100% Acrylic binder. High Opacity and lightfast pigments
2: Mixing Ratio: Single pack, ready to use after thinning.20-30%
3: Covering Capacity: 15-18 m2/ liter per coat on non porous surface.
4: Film Thickness: 25-37 microns
5: Number of Coats: 2 on prepared surface.
6: Gloss: Very low reflection which helps hiding surface imperfection.
7: Application: Brush, Roller And Conventional Spray.
8: Drying Time: To Touch Dry: 30 Mint To Recoat able: 2 Hours
9: Dries By: Evaporation, Coalescence
10: Thinner: Sweet water
11: Flash Point: Non Flammable
12: Color Range: Wide Desire shades range available.
13: Shelf Life: Minimum 1 year if kept in sealed container.
14: Packing: 0.91, 3.64 and 14.56 Liters
Recommended use:
Recommended to use for exterior applications when high protection and beauty is recommended on concrete, cement, hardboard, and brick surfaces of educational institutions, residential, commercial, industrial buildings. Also it can be applied over textures.
Surface Preparation:
The surface shall be fully cured, dry and free from laitance, dirt, dust, oil etc. The surface to be painted should be clean, dry and free from grease, dust, dirt, rust and peeling or loose material.
Application:
Stir thoroughly with a broad flat stirrer, using an upward lifter action. After thin down is ready to use with brush or roller application, for spray application thin as recommended. Apply one or more coats to achieve complete obliteration.