Next Paints
NEXT Water Base Primer
NEXT Primer is a water based primer based on acrylic co-polymer. It has good alkali resistance, sealing and binding properties and it is recommended for use for internal and external walls. Next Multi-Surface Stain-Blocking Primer and Sealer is an interior/exterior water-based primer that can be used under any paint sheen. It contains rust-inhibitive properties that helps resist corrosion. This primer blocks medium to heavy stains and is tint able for dramatic color changes. This is also a low odor, zero VOC formula. The self-leveling acrylic blend helps create a uniform topcoat sheen.
Alkali Resistant Primer is a water-based acrylic primer that provides an excellent base for topcoats on exterior surfaces like cement, concrete, and brick. It has good penetrating properties and dries to a white color.
FEATURE:- Alkali resistance.
- Physical barrier to salt migration.
- Excellent adhesion.
- Decreasing paint consumption.
- Eliminates suction
- Enhance binding of paint with wall.
Technical Specification:
1: Composition: High quality Alkali resistant primer.
2: Mixing Ratio: 4 parts by volume of component.
3: Covering Capacity: 10-12
m2/liter per coat it depending on application method and substrate porosity. Does not include the loss of material from spraying.
4: Film Thickness: 15-20 microns/Coat
5: Number of Coats: 1 coat.
6: Gloss: FLAT.
7: Application: Brush, Roller, And Conventional Spray.
8: Dries By: Evaporation, Oxidation.
9: Drying Time: To Touch Dry: 1 Hour
To Hard dry: 7-10 Hours
10: Thinner: Soft water/tap water.
11: Shelf Life: Minimum 1 year if kept in sealed container. 13: Packing: 0.91, 3.64 and 14.56 Liters
Recommended use:
Ideal as primer for exterior and interior surfaces like walls, ceilings, partition, etc Substrates, Concrete, masonry, cement rendering, plaster, etc Next primer can be applied by spray, brush, or roller and has a drying time of 1-10 hours depending on conditions.
Surface preparation:
The substrate must be sound, clean, free from dust, oil, grease and laitance etc. All traces of release agents must be removed. On chalky and dusty surfaces, all loose material must be removed by stiff bristle brushing.