Next Paints
NEXT SILK EMULSION
NEXT Silk Emulsion is a Premium quality interior and exterior Paint based on Acrylic, its emulsion which gives soft effect to the walls. It is a long lasting and easy to sustain. A wide range of shades makes this water-based emulsion paint an upgrade from distemper. Do away with distemper and get beautiful walls right away!
Superior quality acrylic copolymer based emulsion paint, with a good colour experience due to its colour accuracy. A superior quality emulsion with a smooth and silky finish, providing an improved colour experience. Gives the most accurate colours; what you see in the colour card is what you will get on the wall. Ideal for all indoor spaces, specifically living rooms and bedrooms or other areas with high visibility.
FEATURE:- Smooth silky finish
- Good Washability
- Gives a good colour experience
- Accurate Colours
- Environment friendly.
- Excellent smooth finish.
- Scrub resistant
- Extreme hide, neither more than 2 coats in any color.
Technical Specification:
1: Composition: Based on Co-polymer emulsion binder. High Opacity and lightfast pigments
2: Mixing Ratio: Single pack, ready to use after thinning.
3: Covering Capacity: 15-17 m2/ liter per coat on non porous surface.
4: Film Thickness: 25-35 microns
5: Number of Coats: 2 on prepared surface.
6: Gloss: Very low reflection which helps hiding surface imperfection.
7: Application: Brush, Roller And Conventional Spray.
8: Drying Time: To Touch Dry: 30 Mint
To Recoat able: 2 Hours
9: Dries By: Evaporation, Coalescence
10: Thinner: Sweet water.
11: Flash Point: Non Flammable
12: Color Range: Wide Desire shades range available.
13: Shelf Life: Minimum 1 year if kept in sealed container.
14: Packing: 0.91, 3.64 and 14.56 Liters
Surface Preparation:
The surface shall be fully cured, dry and free from laitance, dirt, dust, oil etc. The surface to be painted should be clean, dry and free from grease, dust, dirt, rust and peeling or loose material.
Application:
Stir thoroughly with a broad flat stirrer, using an upward lifter action. After thin down is ready to use with brush or roller application, for spray application thin as recommended. Apply one or more coats to achieve complete obliteration.