Next Paints
NEXT Matt Finish
NEXT Matt Enamel is a highly washable paint, thus you can wipe off most common household stains easily. NEXT Matt finish comes in matt finish to ensure rich and diverse colours.
NEXT Matt Finish is general purpose smooth and washable; alkyd based matt synthetic enamel for interior and exterior applications. It has excellent leveling and opacity to provide a smooth flat finish to surfaces. It can be used for steel surface applications in moderate atmospheric environments. It is highly washable and has excellent adhesion on properly cleaned steel surfaces.
FEATURE:- Excellent flow and leveling. Superb appearance - uniform sheen.
- Top quality Matt enamel for interior use.
- Outstanding adhesion.
- Easy application.
- Excellent color retention.
- 100% Washable.
Technical Specification:
1: Composition: Based on special Long Oil alkyd resin. High Opacity and durable pigments.
2: Mixing Ratio: Single pack, ready to use after thinning.20-30%
3: Covering Capacity: 14-16 m2/ liter per coat on non porous surface.
4: Film Thickness: 20-25 microns/Coat
5: Number of Coats: 2 or 3 on prepared surface.
6: Gloss: Sheen.
7: Application: Brush, Roller and conventional Spray.
8: Dries By: Evaporation, Oxidation.
9: Drying Time: To Touch Dry: 3 Hour
To Recoat able: 16-18 Hours
To Hard dry: 24 Hours
10: Thinner: Mineral Turpentine/White Spirit.
11: Dilution: 20-30% as required
12: Color Range: Wide Desire shades range available.
13: Flash Point: 37°C
14: Shelf Life: 12 months (sealed container)
15: Storage: Out of sunlight
Temperature: 5°C up to 40°C
16: Packing: 0.91, 3.64 and 14.56 Liters
Surface Preparation:
The surface shall be fully cured, dry and free from laitance, dirt, dust, oil etc. The surface to be painted should be clean, dry and free from grease, dust, dirt, rust and peeling or loose material.
Application:
Stir thoroughly with a broad flat stirrer, using an upward lifter action. After thin down is ready to use with brush or roller application, for spray application thin as recommended. Apply one or more coats to achieve complete obliteration.