Next Paints
NEXT RED OXIDE PRIMER
NEXT RED OXIDE PRIMER NEXT Red Oxide Primer Sealer is an excellent sealer.A high rust preventative coating that contains a special penetrating resin that bonds to steel surfaces and stops rust. This is a high quality anti suction, Alkali resistant primer specially formulated with chemically resistant resins and pigments.
- A high gloss, lead-free enamel that can be applied directly on steel.
- Economical primer.
- Excellent adhesion.
- Decreasing paint consumption.
- Enhance binding of paint with surface.
Technical Specification:
1: Composition: High quality rust resistant.
2: Mixing Ratio: 4 parts by volume of component.
3: Covering Capacity: 10-12 m2/ liter per coat.
4: Film Thickness: 15-20 microns/Coat
5: Number of Coats: 1 coat.
6: Gloss: Matt.
7: Application: Brush, Roller, And Conventional Spray.
8: Dries By: Evaporation, Oxidation.
Drying Time: To Touch Dry: 2 Hours
9: To Recoat able: 12 Hours
10: To Hard dry: 24 Hours
11: Thinner: Mineral Turpentine/White Spirit.
12: Color: Red Oxide
13: Shelf Life: Minimum 1 year if kept in sealed container.
14: Packing: 0.91, 3.64 and 14.56 Liters
Surface Preparation:
Surfaces must be clean, dry and free from dust, grease, mildew or wax. Remove all loose rust from steel with a wire brush. Remove any loose and peeling paint and repair with patching compound. Ensure all wood joints and seams are filled with a paintable caulking to prevent moisture ingress. Prime as required below. Surface repairs should be spot primed.
Application:
When spraying ensure that soakage has been completely fulfilled during application. Dilution to be with Turpentine or White Spirit up to 20-30% depending on ambient conditions, method of application, surface porosity etc.